I installed the r.xml mode file and then tested it by opening a file with .R extension. The syntax highlighting worked just fine, so I thought I did the installation correctly, but now I'm unable to close that file, exiting jedit and re-opening doesn't help, the file is still open. I get this error message:
java.lang.NullPointerException: Mode must be non-null
at org.gjt.sp.jedit.Buffer.setMode(Buffer.java:2016)
at org.gjt.sp.jedit.Buffer.setMode(Buffer.java:2066)
at org.gjt.sp.jedit.Buffer.finishLoading(Buffer.java:3920)
at org.gjt.sp.jedit.Buffer.access$800(Buffer.java:71)
at org.gjt.sp.jedit.Buffer$1.run(Buffer.java:280)
at org.gjt.sp.util.WorkThreadPool.addWorkRequest(WorkThreadPool.java:110)
at org.gjt.sp.jedit.io.VFSManager.runInAWTThread(VFSManager.java:261)
at org.gjt.sp.jedit.Buffer.load(Buffer.java:317)
at org.gjt.sp.jedit.jEdit.openFile(jEdit.java:1473)
at org.gjt.sp.jedit.jEdit.newFile(jEdit.java:1617)
at org.gjt.sp.jedit.jEdit.newFile(jEdit.java:1572)
at org.gjt.sp.jedit.jEdit._closeBuffer(jEdit.java:1717)
at org.gjt.sp.jedit.jEdit.closeBuffer(jEdit.java:1664)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at bsh.Reflect.invokeOnMethod(Reflect.java:149)
at bsh.Reflect.invokeStaticMethod(Reflect.java:100)
at bsh.Name.invokeMethod(Name.java:872)
at bsh.BSHMethodInvocation.eval(BSHMethodInvocation.java:72)
at bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:102)
at bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:47)
at bsh.BSHBlock.evalBlock(BSHBlock.java:130)
at bsh.BSHBlock.eval(BSHBlock.java:80)
at bsh.BshMethod.invokeImpl(BshMethod.java:349)
at bsh.BshMethod.invoke(BshMethod.java:246)
at bsh.BshMethod.invoke(BshMethod.java:171)
at org.gjt.sp.jedit.BeanShell.runCachedBlock(BeanShell.java:523)
at org.gjt.sp.jedit.BeanShellAction.invoke(BeanShellAction.java:76)
at org.gjt.sp.jedit.gui.InputHandler.invokeAction(InputHandler.java:229)
at org.gjt.sp.jedit.jEdit$3.invokeAction(jEdit.java:2910)
at org.gjt.sp.jedit.EditAction$Wrapper.actionPerformed(EditAction.java:216)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)

I fallowed all the steps for getting it to work and it does for maya 2008 but when I try it with 09 it just lags for about 1.2 sec and then nothing. Any one have a idea as to why? I have tried changing the port and it had no effect.

Hi, I am getting this when I trigger code completion with JavaSideKick. Can anyone help?

I installed JavaSideKick via Plugin Manager and have configured the classpath for the project.

Thanks.

java.lang.NullPointerException
at sidekick.java.util.Locator.getClasses(Locator.java:357)
at sidekick.java.util.Locator.getProjectClasses(Locator.java:299)
at sidekick.java.JavaCompletionFinder.getPossibleQualifiedCompletions(JavaCompletionFinder.java:230)
at sidekick.java.JavaCompletionFinder.getPossibleCompletions(JavaCompletionFinder.java:169)
at sidekick.java.JavaCompletionFinder.complete(JavaCompletionFinder.java:68)
at sidekick.java.JavaParser.complete(JavaParser.java:640)
at sidekick.SideKickActions.complete(SideKickActions.java:114)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.gjt.sp.jedit.bsh.Reflect.invokeMethod(Reflect.java:134)
at org.gjt.sp.jedit.bsh.Reflect.invokeStaticMethod(Reflect.java:98)
at org.gjt.sp.jedit.bsh.Name.invokeMethod(Name.java:871)
at org.gjt.sp.jedit.bsh.BSHMethodInvocation.eval(BSHMethodInvocation.java:75)
at org.gjt.sp.jedit.bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:102)
at org.gjt.sp.jedit.bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:47)
at org.gjt.sp.jedit.bsh.BSHBlock.evalBlock(BSHBlock.java:130)
at org.gjt.sp.jedit.bsh.BSHBlock.eval(BSHBlock.java:80)
at org.gjt.sp.jedit.bsh.BshMethod.invokeImpl(BshMethod.java:362)
at org.gjt.sp.jedit.bsh.BshMethod.invoke(BshMethod.java:258

I'm trying out jEdit as a possible 21st Century replacement for XEmacs to write python code. By now my fingers are hard-wired with Emacs keybindings, so I installed Brian's Emacs Emulation Package on two different WinXP machines. On one it works just fine. On the other I get a BeanShell error when jEdit starts (text below). I've reinstalled jEdit and the Emacs Package, updated java, and rebooted, but I still get this error. I'm utterly java illiterate, but it does look like it's failing on the very first line of emacs_bindings.bsh, so I suspect some installation problem. My java is:
Java(TM) SE Runtime Environment (build 1.6.0_15-b03)

Please help ?!
-gap

------------------------------------------------------------
Sourced file: C:\Documents and Settings\Gary\.jedit\startup\emacs_bindings.bsh : Class: bsh.ClassIdentifier not found in namespace : at Line: 26 : in file: print : bsh .ClassIdentifier

Called from method: print : at Line: 8 : in file: C:\Documents and Settings\Gary\.jedit\startup\emacs_bindings.bsh : print ( "in emacs_bindings.bsh" )
at org.gjt.sp.jedit.bsh.BSHAmbiguousName.toClass(BSHAmbiguousName.java:74)
at org.gjt.sp.jedit.bsh.BSHType.getType(BSHType.java:154)
at org.gjt.sp.jedit.bsh.BSHBinaryExpression.eval(BSHBinaryExpression.java:63)
at org.gjt.sp.jedit.bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:102)
at org.gjt.sp.jedit.bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:47)
at org.gjt.sp.jedit.bsh.BSHUnaryExpression.eval(BSHUnaryExpression.java:58)
at org.gjt.sp.jedit.bsh.BSHBinaryExpression.eval(BSHBinaryExpression.java:123)
at org.gjt.sp.jedit.bsh.BSHBinaryExpression.eval(BSHBinaryExpression.java:52)
at org.gjt.sp.jedit.bsh.BSHIfStatement.evaluateCondition(BSHIfStatement.java:63)
at org.gjt.sp.jedit.bsh.BSHIfStatement.eval(BSHIfStatement.java:46)
at org.gjt.sp.jedit.bsh.BSHBlock.evalBlock(BSHBlock.java:130)
at org.gjt.sp.jedit.bsh.BSHBlock.eval(BSHBlock.java:80)
at org.gjt.sp.jedit.bsh.BshMethod.invokeImpl(BshMethod.java:362)
at org.gjt.sp.jedit.bsh.BshMethod.invoke(BshMethod.java:258)
at org.gjt.sp.jedit.bsh.BshMethod.invoke(BshMethod.java:186)
at org.gjt.sp.jedit.bsh.Name.invokeLocalMethod(Name.java:955)
at org.gjt.sp.jedit.bsh.Name.invokeMethod(Name.java:801)
at org.gjt.sp.jedit.bsh.BSHMethodInvocation.eval(BSHMethodInvocation.java:75)
at org.gjt.sp.jedit.bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:102)
at org.gjt.sp.jedit.bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:47)
at org.gjt.sp.jedit.bsh.Interpreter.eval(Interpreter.java:644)
at org.gjt.sp.jedit.BeanShell._runScript(BeanShell.java:331)
at org.gjt.sp.jedit.BeanShell._runScript(BeanShell.java:279)
at org.gjt.sp.jedit.BeanShell.runScript(BeanShell.java:205)
at org.gjt.sp.jedit.Macros$BeanShellHandler.runMacro(Macros.java:1030)
at org.gjt.sp.jedit.jEdit.runStartupScripts(jEdit.java:3704)
at org.gjt.sp.jedit.jEdit.main(jEdit.java:511)

In Leopard I want to open files (txt, css, html, etc) with Jedit. Jedit opens but with empty screen, file did not open. I have to open file manually.
How to tell Jedit I want the file to open when I click on file? Leopard knows I want to open some files with Jedit (told Leopard with file info)

I'm using the latest Version of JEdit (4.3pre17) and the corresponding FTP-plugin (0.9.5) under java 1.6.0_16. When I'm trying to connect to my server using sftp, it fails reporting the following i/o error message:

Cannot list directory: java.io.IOException: com.jcraft.jsch.JSchException: failed to send channel request

Here is the excerpt of the log file:

[...]
13:23:16 [jEdit I/O #4] [message] SftpLogger: SSH_MSG_NEWKEYS sent
13:23:16 [jEdit I/O #4] [message] SftpLogger: SSH_MSG_NEWKEYS received
13:23:16 [jEdit I/O #4] [message] SftpLogger: SSH_MSG_SERVICE_REQUEST sent
13:23:16 [jEdit I/O #4] [message] SftpLogger: SSH_MSG_SERVICE_ACCEPT received
13:23:16 [jEdit I/O #4] [message] SftpLogger: Authentications that can continue: publickey,keyboard-interactive,password
13:23:16 [jEdit I/O #4] [message] SftpLogger: Next authentication method: publickey
13:23:16 [jEdit I/O #4] [message] SftpLogger: Authentications that can continue: keyboard-interactive,password
13:23:16 [jEdit I/O #4] [message] SftpLogger: Next authentication method: keyboard-interactive
13:23:16 [jEdit I/O #4] [message] SftpLogger: Authentications that can continue: password
13:23:16 [jEdit I/O #4] [message] SftpLogger: Next authentication method: password
13:23:16 [jEdit I/O #4] [message] SftpLogger: Authentication succeeded (password).
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: java.io.IOException: com.jcraft.jsch.JSchException: failed to send channel request
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: at ftp.SFtpConnection.(SFtpConnection.java:101)
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: at ftp.ConnectionManager.getConnection(ConnectionManager.java:328)
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: at ftp.FtpVFS.getConnection(FtpVFS.java:458)
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: at ftp.FtpVFS._canonPath(FtpVFS.java:195)
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: at org.gjt.sp.jedit.browser.BrowserIORequest.listDirectory(BrowserIORequest.java:158)
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: at org.gjt.sp.jedit.browser.BrowserIORequest.run(BrowserIORequest.java:90)
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: at org.gjt.sp.util.WorkThread.doRequest(WorkThread.java:213)
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: at org.gjt.sp.util.WorkThread.doRequests(WorkThread.java:180)
13:23:16 [jEdit I/O #4] [error] BrowserIORequest: at org.gjt.sp.util.WorkThread.run(WorkThread.java:154)


I also tried this with older versions of JEdit an the ftp plugin, e.g. with JEdit 4.2final and ftp 0.7.3. It doesn't work either, though throwing a different error. I even downloaded the latest version of JSch and replaced the version in the jar directory of JEdit, resulting in the same error message. I don't know what's going wrong, maybe somebody out there has any ideas? Please help cause I'm out of options...

Thanks in advance,
sven

Hi all, My jEdit is not putting the underscore in the editing text area - it puts a blank space in its place -. Here's the keyboard test output: Event KEY_PRESSED,keyCode=0x10,keyChar=0xffff,modifiers=0x1,consumed=0 filtered Event KEY_PRESSED,keyCode=0x2d,keyChar=0x5f,modifiers=0x1,consumed=0 filtered Event KEY_TYPED,keyCode=0x0,keyChar=0x5f,modifiers=0x1,consumed=0 passed ==> Translated to <0,5f> Event KEY_RELEASED,keyCode=0x2d,keyChar=0x5f,modifiers=0x1,consumed=0 passed Event KEY_RELEASED,keyCode=0x10,keyChar=0xffff,modifiers=0x0,consumed=0 filtered Could someone help me? Thanks, Diogo

After updating Java to version 6 update 15 on Windows Vista (Ultimate, 64-bit), I realized that I had jEdit 4.2 installed and decided to update it to the latest version (4.3pre17) because certain plug-ins weren't working as expected. After installing 4.3pre17, I'm getting the following exception when trying to launch jEdit:

java.lang.ClassCastException: org.gjt.sp.jedit.Buffer cannot be cast to java.awt.Component
	at org.gjt.sp.jedit.View.restoreSplitConfig(View.java:1747)
	at org.gjt.sp.jedit.View.setSplitConfig(View.java:911)
	at org.gjt.sp.jedit.View.(View.java:1356)
	at org.gjt.sp.jedit.jEdit.newView(jEdit.java:2403)
	at org.gjt.sp.jedit.PerspectiveManager$PerspectiveHandler.endElement(PerspectiveManager.java:341)
	at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(Unknown Source)
	at com.sun.org.apache.xerces.internal.impl.dtd.XMLNSDTDValidator.endNamespaceScope(Unknown Source)
	at com.sun.org.apache.xerces.internal.impl.dtd.XMLDTDValidator.handleEndElement(Unknown Source)
	at com.sun.org.apache.xerces.internal.impl.dtd.XMLDTDValidator.endElement(Unknown Source)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(Unknown Source)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
	at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
	at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
	at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
	at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
	at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
	at org.gjt.sp.util.XMLUtilities.parseXML(XMLUtilities.java:139)
	at org.gjt.sp.jedit.SettingsXML.load(SettingsXML.java:155)
	at org.gjt.sp.jedit.PerspectiveManager.loadPerspective(PerspectiveManager.java:104)
	at org.gjt.sp.jedit.EditServer.handleClient(EditServer.java:215)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
	at java.lang.reflect.Method.invoke(Unknown Source)
	at org.gjt.sp.jedit.bsh.Reflect.invokeMethod(Reflect.java:134)
	at org.gjt.sp.jedit.bsh.Reflect.invokeStaticMethod(Reflect.java:98)
	at org.gjt.sp.jedit.bsh.Name.invokeMethod(Name.java:871)
	at org.gjt.sp.jedit.bsh.BSHMethodInvocation.eval(BSHMethodInvocation.java:75)
	at org.gjt.sp.jedit.bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:102)
	at org.gjt.sp.jedit.bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:47)
	at org.gjt.sp.jedit.bsh.BSHAssignment.eval(BSHAssignment.java:77)
	at org.gjt.sp.jedit.bsh.Interpreter.eval(Interpreter.java:644)
	at org.gjt.sp.jedit.bsh.Interpreter.eval(Interpreter.java:738)
	at org.gjt.sp.jedit.bsh.Interpreter.eval(Interpreter.java:727)
	at org.gjt.sp.jedit.BeanShellFacade._eval(BeanShellFacade.java:148)
	at org.gjt.sp.jedit.BeanShellFacade.eval(BeanShellFacade.java:113)
	at org.gjt.sp.jedit.BeanShell.eval(BeanShell.java:369)
	at org.gjt.sp.jedit.EditServer$1.run(EditServer.java:343)
	at java.awt.event.InvocationEvent.dispatch(Unknown Source)
	at java.awt.EventQueue.dispatchEvent(Unknown Source)
	at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
	at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
	at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
	at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
	at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
	at java.awt.EventDispatchThread.run(Unknown Source)

Hi All, I have installed the Windows version of jEdit version 4.3 pre17 and am having trouble getting the SQL plugin installed properly. After it (jEdit and the SQL plugin)was installed, I read all the documentation and have not been able to get the SQL properties tab or tree to show up in the docked Project Viewer. Initially, I installed it via the plugin manager, but after reading the documentation, I noticed that the C:\Documents and Settings\\.jedit\sql directory was empty. So,I downloaded and manually installed the plugin, but am still having the same result. Any ideas? Since this plugin uses the project viewer plugin could it be a plugin-to-plugin problem, or am I just doing something wrong? Thanks in advance

I had a functioning installation of jedit, but something changed and now it won't load.

The splash screen appears and most of the start-up steps seem to complete successfully, but when it gets to the "run statup scripts" stage it stops loading indefinitely, without any cpu activity.

I'm using 4.3pre17 on WindowsXP.

Some things I've tried:

- Starting from the command line with the -nostartupscripts argument

- Deleting startup.bsh, which (apart from readme.txt) is the only file in the startup folder.

- Uninstalling and re-installing jedit 4.3pre17

- Uninstalling, deleting the jedit program folder, and re-installing.

- Uninstalling and installing 4.2

In all cases it still won't get past "run startup scripts"

Is there a settings directory or registry entry that I should also be deleting to perform a complete uninstall? Or does someone have any ideas about how I might otherwise fix the issue?

I miss jedit.

hi all,

i have a problem creating a mode.
i'd like to have some highlighting on the log and i've created this:

http://www.pastie.org/569660

but whenever i put anything like a regex special character (e.g. "\d") in the "end" tag, it selects everything until the end of the page.
for instance, "line " or "line 1" works ok, but "line ." is screwed

any ideas?

cannot start :java.lang.unsupporedclassveresionerror :bad versions number in .class file try updating new version of the plugin(lazy8ledzer)

Greetings! I have recently installed jEdit on Windows and Ubuntu. Under Windows the Plugin Manager lists some plugins not listed under Ubuntu. For instance, XML and Python Client. Is this normal? Is there a fix besides manual installation (which already gave me a few headaches)?

Thanks in advance!

Eze

Using jEdit 4.3pre16
7:19:10 AM [main] [message] Log: When reporting bugs, please include the following information:
7:19:10 AM [main] [message] Log: java.version=1.6.0_13
7:19:10 AM [main] [message] Log: java.vm.version=11.3-b02
7:19:10 AM [main] [message] Log: java.runtime.version=1.6.0_13-b03
7:19:10 AM [main] [message] Log: java.vendor=Sun Microsystems Inc.
7:19:10 AM [main] [message] Log: java.compiler=null
7:19:10 AM [main] [message] Log: os.name=Linux
7:19:10 AM [main] [message] Log: os.version=2.6.28-11-generic
7:19:10 AM [main] [message] Log: os.arch=i386
7:19:10 AM [main] [message] Log: user.home=/home/raklet
7:19:10 AM [main] [message] Log: java.home=/usr/lib/jvm/java-6-sun-1.6.0.13/jre
7:19:10 AM [main] [message] Log: java.class.path=/usr/share/jedit/jedit.jar


Fast open is not behaving properly. First, it does not find all of the files in my project. I have indexing set to 5 seconds and will even click on reindex to make sure it is up to date. I have hundreds of files located in dozens of directories. Here is a subset of some of my files as an example.

Directory - Sources
Files:
Subs-Auth.php
Subs-Boards.php
Subs-Charset.php
Subs-Graphics.php
Subs-Members.php
Subs-Post.php
Subs.php

That is just a small sample of numerous files. In fast open, I type the letters "su" because I am looking for Subs.php. Fast open only returns one result - Subs-Post.php. It misbehaves in this way with every other file search. It will only return few or no results out of many possible. Providing a complete file name usually ends up with no match at all.

There are some errors in the activity log generated by Fast Open.

7:19:15 AM [Thread-2] [error] Thread-2: at com.patelsoft.fastopen.FastOpen.getFilePattern(FastOpen.java:583)
7:19:15 AM [Thread-2] [error] Thread-2: at com.patelsoft.fastopen.FastOpen.findfile(FastOpen.java:467)
7:19:15 AM [Thread-2] [error] Thread-2: at com.patelsoft.fastopen.FastOpen.indexingCompleted(FastOpen.java:1028)
7:19:15 AM [Thread-2] [error] Thread-2: at com.patelsoft.fastopen.AbstractIndexManager.notifyListeners(AbstractIndexManager.java:98)
7:19:15 AM [Thread-2] [error] Thread-2: at com.patelsoft.fastopen.AbstractIndexManager.queryFilesFromSource(AbstractIndexManager.java:61)
7:19:15 AM [Thread-2] [error] Thread-2: at com.patelsoft.fastopen.PollingIndexManager.collectFiles(PollingIndexManager.java:60)
7:19:15 AM [Thread-2] [error] Thread-2: at com.patelsoft.fastopen.PollingIndexManager.run(PollingIndexManager.java:41)

Using jedit 4.3pre16 and java 1.6.0_13 on linux.

When I first installed the whitespace plugin, it wouldn't show any whitespace characters at all. I munged these forums and online until I finally figured out that I needed to install Sun's JDK. After I installed it and restarted jedit, all was well. After a couple weeks of use, I just noticed that whitespace is not showing up again. I don't know exactly when it went away because I wasn't looking for it.

I don't mind figuring out where it went wrong, but I'm not even sure where to look. If someone could point me in the right direction, I would appreciate it.

Thanks

I'm a new user of jEdit 4.3. After installing jEdit, I found that I can no longer use links for Microsoft Live Meeting. The link is to a file called launch[1].rtc. When I click on a LiveMeeting link, jEdit opens up with the XML for connecting to the meeting rather than LiveMeeting opening up. This behavior suggests that there is a problem with file associations. However, when I check the file associations the .rtc files are associated to LiveMeeting in the registry as well as "File Types" under Folder Options. Uninstalling jEdit resolves the issue. Before permanently uinstalling jEdit and looking for another editor, I thought I would see if anyone has stumbled upon this issue or perhaps knows if jEdit has it's own set of file associations.

hey ppls.

i downloaded the maya plugin from highend - link: http://www.highend3d.com/maya/downloads/tools/syntax_scripting/jEdit-Maya-Editor-Plugin-3732.html

after following the installation rules as described in the tutorial: http://www.highend3d.com/maya/tutorials/using_tools_scripts/319-1.html
i got the following error: (image link): http://www.resurrexion.org/images/jedit_mayaerror.jpg

does anyone know if that could be a compatibility error with the jedit version, any ideas?

thanks in advance
i'd love to get this working, as the internal script editor from maya is totally crap.

cheers
Bastian

I'm using 4.2final

When doing File|Open or File|Save As, the resultant dialog box is very narrow horizontally.

If I type "jEdit.getProperty("vfs.browser.dialog.width")" into the BeanShell, I get a value of 112 (on startup - as indicated in the properties file). If I manually resize the window (by dragging its edge), and check
on the window width, I'll get a value in the range of 600-700 (depending on how I resize it). I can also set the width by jEdit.setProperty("vfs.browser.dialog.width", "650"). If I check the width by jEdit.getProperty("vfs.browser.dialog.width"), the width is reported as I have set it.

If I then try and open (or save) another file, the dialog box opens as a narrow box, and the width reverts back to 112.

I can manually set the height by either dragging the window or using jEdit.setProperty and it is remembered.
I can manually set the x position by using jEdit.setProperty and it is remembered. If I drag it, it isn't remembered.
If I try to set a y value, jEdit forgets it.


I have tried exiting jEdit and editing the properties files to change the vfs.browser.dialog.width to a larger number. If I edit it, and then check on the value (jEdit.getProperty) before opening any dialog boxes, the value is reported as I have set it. After I try to open a file, the dialog box opens up as narrow, and the dialog box width is now reported as 112.


Any ideas?

Hello,

i've got problems with the error-list plugin. I have searched the forum an google and didn't find any solution for my problem.

Every time i start my batch file for compiling from console the errors were displayed correct in the error-list. Now when i klick on an error in order to jump to it then the file with the errors opens again with now content and the cursor jumps to this file of course in line number 1. After that all other line-numbers in the error-list switch to 1.

So i can't use the error-list for that it was made for . Can anybody help me?
Thanks.

Maybe I'm missing something.

Is there a Buffer or Global Options setting in the present stable version to prevent either of these from happening when saving a file? If there isn't one, adding one would put jEdit ahead of the (lite versions of the) commercial developer-oriented text editors and definitely ahead of those emacs and vim clones that are still around for Windows and Mac OS X.

The whack-n's are particularly annoying when they appear in shell scripts in Cygwin and other Linux/Unix-es.

A cross-platform text editor should default with cross-platform file-write settings, imo, and as Mac and Windows both glom onto LF (without any /n ornamentation), logically that's the better, if not best, choice for a default.

Again, my opinion.

If I'm missing a hint or a clue as to the settings, please let me know.

BZT