I just installed pre4 and FTP plugin v 0.7.7
Now whenever I save a file to a FTP server a dialog is shown telling me the file is readonly and that it will be saved with two stage save. This is very annoying. The file is clearly *not* readonly, it is r/w for the ftp user. Any ideas why that happens?

I recently installed jEdit 4.2 final on my Kubuntu 6.04 (Dapper Drake) system, with java version 1.4.2-02 installed. The first thing I wanted to do was to enable some plugins, but when trying to install them through plugin manager (any plugin, multiple number of tries), I get a message box saying "An I/O error occurred (Connection refused)" and the messages below in the console window in which I started jEdit. My system is connected to the internet through an router using NAT, with no restrictions, firewalls or proxies. I have no problems whatsover with my internet connection other than this. Any ideas? Messages in Console Window: [error] Roster$Install: java.net.ConnectException: Connection refused [error] Roster$Install: at java.net.PlainSocketImpl.socketConnect(Native Method) [error] Roster$Install: at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305) [error] Roster$Install: at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171) [error] Roster$Install: at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158) [error] Roster$Install: at java.net.Socket.connect(Socket.java:452) [error] Roster$Install: at java.net.Socket.connect(Socket.java:402) [error] Roster$Install: at sun.net.NetworkClient.doConnect(NetworkClient.java:139) [error] Roster$Install: at sun.net.www.http.HttpClient.openServer(HttpClient.java:402) [error] Roster$Install: at sun.net.www.http.HttpClient.openServer(HttpClient.java:618) [error] Roster$Install: at sun.net.www.http.HttpClient.(HttpClient.java:306) [error] Roster$Install: at sun.net.www.http.HttpClient.(HttpClient.java:267) [error] Roster$Install: at sun.net.www.http.HttpClient.New(HttpClient.java:339) [error] Roster$Install: at sun.net.www.http.HttpClient.New(HttpClient.java:320) [error] Roster$Install: at sun.net.www.http.HttpClient.New(HttpClient.java:315) [error] Roster$Install: at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:521) [error] Roster$Install: at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:498) [error] Roster$Install: at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:626) [error] Roster$Install: at org.gjt.sp.jedit.pluginmgr.Roster$Install.download(Roster.java:417) [error] Roster$Install: at org.gjt.sp.jedit.pluginmgr.Roster$Install.runInWorkThread(Roster.java:314) [error] Roster$Install: at org.gjt.sp.jedit.pluginmgr.Roster.performOperationsInWorkThread(Roster.java:82) [error] Roster$Install: at org.gjt.sp.jedit.pluginmgr.PluginManagerProgress$RosterThread.run(PluginManagerProgress.java:181)

Hey all, I was always bothered by how SCRIPT and STYLE tags in HTML or PHP mode look kind of ugly because of how those modes have to delegate their contents to the right ruleset. This may have been discovered already but I've found a pretty simple solution. I'm not sure if I should release it to the files section though, as my mode files are pretty customized in other ways too (customized OCD style ).

Basically, my new rules highlight any occurences of '<script' or '<style' as 'MARKUP', along with their matching closing tags, and delegate everything between them to a 'mediating' ruleset, which imports the rules from the TAGS ruleset (so any attributes of the style or script tag are highlighted properly), but adds a rule to delegate anything after '>' to either CSS mode or Javascript mode. Doesn't sound as simple as I thought.

Anyway, I can't get HTML to show up on this forum, so if you want to see what the rules look like in html.xml, look at this file:
http://www.flowingcreativity.net/jedit-better-rules.txt

Hi
I am a novice user and so far am pleasantly surprised with JEdit features. I face a small problem which I think is due to my lack of exp with this. I want to do a search and replace some string with a beanshell syntax.

for eg
search - (\d+)=(\w+)
replace - _1 + text.getCaretLine() + _2 (beanshell expression).

I get an error to the effect that text is undefined. For that matter, I get the same error even for the predefined var. "line". What is going on?

Any insight will be highly appreciated.
Thanks
SK.

most MacOSX apps. allow horizontal scrolling using shift+scroll. Anyway to recreate this in jEdit?

thanks

When using the Project Viewer, with the file I edit using jEdit, I've got a lot of temp' file (example : foo.php~) which I'd like to cut off the project tree.

The problem is that the glob pattern does not accept to do something like this :

!*~

This will restrain file finishing by ~ as well as other file...

I think it could be better to have a set of regexp : we would have a JTable, with a list of regexp (in order of priority) so that when we reimport file using filter, it use regexp to match (or not) the file name.

Hi,

Feature-Request 1: Directory-Tabs in System Browser

i work on many projects in many directories at the same task. If i use the bookmark-function and the Path-History, i can get quick-access to the latest directories, im working in. Ok, thats the status!
I work for a long time with homesite. There are Tabs ([Files1][Files2]) to switch between two project-folder with one click. Please also add this feature to the File System Browser in jEdit.

Feature-Request 1: HTML-Preview

in Homesite, there is a Tab in all Edit-Windows, to show the code in the default Webbrowser.
Is there a option to do that in jEdit?

Regards,
Andreas

Hello All,

Does anyone have a handy filter that will ignore the "svn" directories for a subversion project when doing a search for files in a directory? I often search for code in my subversion based project directories using the "Search and Replace" feature and don't want all the redudant files in the "svn" directories to show up too. I have not figured out a way to use the filters feature to filter out those files.

Thanks!
Peter

Hi,

Is there perchance a new version of the JCompiler in development? 1.7 can't seem to work with 4.2.xx versions of the Console. (Gives the java.lang.NoSuchMethodError: console.Console.setShell(Lconsole/Shell;... error. Also seems to work with only some success in Console 4.1.2.)

Hello, I just installed jEdit on a WinXP computer. I'm particularly interested in its folding feature. I installed SideKick and Outline, but when I try to launch Outline I get this Bean error message: many thanks jf -------------------------------------------- java.lang.NoSuchMethodError: sidekick.SideKickPlugin.getErrorSource(Lorg/gjt/sp/jedit/View;)Lerrorlist/DefaultErrorSource; at outline.OutlineTree.update(Unknown Source) at outline.OutlineTree.(Unknown Source) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source) at java.lang.reflect.Constructor.newInstance(Unknown Source) at bsh.Reflect.constructObject(Reflect.java:668) at bsh.BSHAllocationExpression.constructObject(BSHAllocationExpression.java:123) at bsh.BSHAllocationExpression.objectAllocation(BSHAllocationExpression.java:114) at bsh.BSHAllocationExpression.eval(BSHAllocationExpression.java:62) at bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:102) at bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:47) at bsh.Interpreter.eval(Interpreter.java:641) at bsh.Interpreter.eval(Interpreter.java:731) at bsh.Interpreter.eval(Interpreter.java:720) at org.gjt.sp.jedit.BeanShell._eval(BeanShell.java:446) at org.gjt.sp.jedit.BeanShell.eval(BeanShell.java:410) at org.gjt.sp.jedit.gui.DockableWindowManager$Factory.createDockableWindow(DockableWindowManager.java:533) at org.gjt.sp.jedit.gui.DockableWindowManager.showDockableWindow(DockableWindowManager.java:742) at org.gjt.sp.jedit.gui.DockableWindowManager$Factory$OpenAction.invoke(DockableWindowManager.java:553) at org.gjt.sp.jedit.gui.InputHandler.invokeAction(InputHandler.java:229) at org.gjt.sp.jedit.jEdit$3.invokeAction(jEdit.java:2910) at org.gjt.sp.jedit.EditAction$Wrapper.actionPerformed(EditAction.java:216) at javax.swing.AbstractButton.fireActionPerformed(Unknown Source) at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.setPressed(Unknown Source) at javax.swing.AbstractButton.doClick(Unknown Source) at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source) at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Unknown Source) at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source) at java.awt.Component.processMouseEvent(Unknown Source) at javax.swing.JComponent.processMouseEvent(Unknown Source) at java.awt.Component.processEvent(Unknown Source) at java.awt.Container.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Window.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source)

How to create a new dockable window and make it docked into the view(at any of the 4 positions TOP,BOTTOM,LEFT,RIGHT except FLOATING) defaultly?

Is anyone interested in providing AutoIt support for editing files with JEdit? http://www.hiddensoft.com/autoit3/

Thanks.

Hello,

jedit version: 4.2final

after installation of LilyPondTool Version 02.9 I get the following error message (see messages below) as a BeanShellError and
the PluginError when I start jedit:

"c:\My\Program Files\jedit\jars\LilyPondTools.jar:
Cannot start: java.lang.UnsupportedClassVersionError: lilytool/LilyToolPlugin (Unsupported major.minor version 49.0)#
Try updating a newer version og the plugin"

But I don't know a newer version of LilyPondTool

Any idea ??
Thanks
D.E.

a

java.lang.UnsupportedClassVersionError: lilytool/parser/LilySideKickParser (Unsupported major.minor version 49.0)

at java.lang.ClassLoader.defineClass0(Native Method)

at java.lang.ClassLoader.defineClass(Unknown Source)

at java.lang.ClassLoader.defineClass(Unknown Source)

at org.gjt.sp.jedit.JARClassLoader._loadClass(JARClassLoader.java:325)

at org.gjt.sp.jedit.JARClassLoader.loadClass(JARClassLoader.java:76)

at java.lang.ClassLoader.loadClass(Unknown Source)

at bsh.BshClassManager.plainClassForName(BshClassManager.java:224)

at bsh.BshClassManager.classForName(BshClassManager.java:170)

at bsh.NameSpace.classForName(NameSpace.java:1265)

at bsh.NameSpace.getClassImpl(NameSpace.java:1165)

at bsh.NameSpace.getClass(NameSpace.java:1106)

at bsh.Name.consumeNextObjectField(Name.java:301)

at bsh.Name.toObject(Name.java:202)

at bsh.BSHAmbiguousName.toObject(BSHAmbiguousName.java:59)

at bsh.BSHAllocationExpression.objectAllocation(BSHAllocationExpression.java:86)

at bsh.BSHAllocationExpression.eval(BSHAllocationExpression.java:62)

at bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:102)

at bsh.BSHPrimaryExpression.eval(BSHPrimaryExpression.java:47)

at bsh.Interpreter.eval(Interpreter.java:641)

at bsh.Interpreter.eval(Interpreter.java:731)

at bsh.Interpreter.eval(Interpreter.java:720)

at org.gjt.sp.jedit.BeanShell._eval(BeanShell.java:446)

at org.gjt.sp.jedit.BeanShell.eval(BeanShell.java:410)

at org.gjt.sp.jedit.ServiceManager$Descriptor.getInstance(ServiceManager.java:321)

at org.gjt.sp.jedit.ServiceManager.getService(ServiceManager.java:264)

at sidekick.SideKickPlugin.getParser(SideKickPlugin.java:142)

at sidekick.SideKickPlugin.getParserForBuffer(SideKickPlugin.java:167)

at sidekick.SideKick.setParser(SideKick.java:131)

at sidekick.SideKick.handleBufferUpdate(SideKick.java:298)

at sidekick.SideKick.handleMessage(SideKick.java:142)

at org.gjt.sp.jedit.EditBus.send(EditBus.java:148)

at org.gjt.sp.jedit.Buffer.propertiesChanged(Buffer.java:1530)

at org.gjt.sp.jedit.Buffer.setMode(Buffer.java:2025)

at org.gjt.sp.jedit.Buffer.setMode(Buffer.java:2058)

at org.gjt.sp.jedit.Buffer.finishLoading(Buffer.java:3920)

at org.gjt.sp.jedit.Buffer.access$800(Buffer.java:71)

at org.gjt.sp.jedit.Buffer$1.run(Buffer.java:280)

at org.gjt.sp.util.WorkThreadPool.doAWTRequest(WorkThreadPool.java:392)

at org.gjt.sp.util.WorkThreadPool.doAWTRequests(WorkThreadPool.java:380)

at org.gjt.sp.util.WorkThreadPool.access$200(WorkThreadPool.java:37)

at org.gjt.sp.util.WorkThreadPool$RunRequestsInAWTThread.run(WorkThreadPool.java:477)

at java.awt.event.InvocationEvent.dispatch(Unknown Source)

at java.awt.EventQueue.dispatchEvent(Unknown Source)

at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)

at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)

at java.awt.EventDispatchThread.pumpEvents(Unknown Source)

at java.awt.EventDispatchThread.pumpEvents(Unknown Source)

at java.awt.EventDispatchThread.run(Unknown Source)

Hello,

I'm using jEdit and Gruntspud (Windows XP) for about on year and have installed in (a few month ago)
on several computers.

Today I installed jEdit 4.2final and Gruntspud 0.4.6-beta via the plugin manager.

I tried to checkout a CVS module with the profile :ssh2:user1@machineName:/usr/cvs.
The checkout failed with the error message:

java.lang.NoSuchMethodError: console.Console.setShell(Lconsole/Shell;)V
at gruntspud.jedit.GruntspudPlugin.getConsole(Unknown Source)
..

After uninstalling all jEdit components (also settings in directory .jedit) and
reinstallation the error still occurs.

A tip to identify the problem ( or even solve ) would be very welcome.

Regards
Michael

I am using Firefox 1.5 to browse the Jedit community web site and on that page:
http://community.jedit.org/?q=user/edit the width of all the dropdown boxes (Themes, Timezone, ...) appear minimized.

I can list all the items of the dropdown box but I cannot read the text entirely; in fact I can only see the 2 or 3 first letters.

The dropdown boxes appear well in IE but I don't want to use it

How can I fix that?

Hi, I use XInsert in html pages. Is it possible that after double clicking on an "insert" the cursor be automatically positioned between the begining and ending tag? This would allow me to be even more efficient by avoiding an extra click. For example when inserting a P tag it writes

and I would like to have the cursor ready to write inner text. Thank you for your reply. Julien

I have JTidy 1.0.1.

After going in the plug-in options for JTidy, when I mouse over a check box a text is displayed in a Help group box at the bottom.
Problem is that the text length varies, and change the height of the help group box.
Result is that the checkboxes and other options above are moved up and down making it impossible to select anything.

How can we fix quickly?

Help the File System Browser doesn't show any files anymore. I'm using jEdit 4.2 on Mac OSX since more than one year and the File System Browser was working, but now it seems to be broken...
When I use File >> Open menu then all files in File System Browser are shown. Unfortunately you can't dock this File Browser, just the File Browser from the Utilities menu.

Any ideas?
Marc

When I open a UTF-8 file without a BOM (Byte Order Mark) in jEdit, I see weird squiggly characters (if you know what I mean) in place of expected Cyrillic. I didn't find a place where I could specify the encoding. I also wanted to have the ability to specify 'no BOM' on any UTF-8 files I may create in future.

I was actually able to type in some Russian, but that isn't enough. I need to be able to open Unicode files created in different applications too.

Any ideas?